Zoom in on the well: set the Depth (click the well, click the depth track, use the Depth slider or pick a
depth in Go to), then press + (top left of the 3-D view, or the + key). Each press zooms 3x, down to an 8 ft piece of
the well. − zooms back out, Whole well (or Home) shows everything. ◀ Up-hole and
Down-hole ▶ (or the arrow keys) slide along the well at the same zoom. The Zoom slider does the same in one move.
Auto exaggeration (on by default) widens the hole, casing and cement as you zoom out so the annulus stays visible, and
goes back toward true size as you zoom in. Untick it, or press True 1x, to hold a setting.
Scroll wheel: zooms toward whatever is under the pointer (empty space zooms toward the middle of the view). Keep
scrolling in and it steps into the well at that depth, down to 8 ft at true size; scroll out and it steps back out.
Rotate: drag. Pan: right-drag or Shift-drag. Reset view puts the camera back. For true-size detail of a
short piece of the well, use + / − (they rebuild the view for that depth).
Hover any layer or the path for MD, TVD, inclination, azimuth, DLS, hole and string sizes (caliper where logged), cement status, bond index, the CBL interval, the nearest cluster reading, equipment, the planned stage and the well log values.
Click the wellbore to set the depth (the cross-section is cut there).
The camera icon at the top right of the view saves a PNG. Orthographic removes perspective for side-on views.
Laterals (multi-lateral wells)
Pick the lateral at the top of the left panel, or click it in the 3-D view. Depth, zoom, the depth track and the
cross-section follow the selected lateral. Show the other lateral draws it from the junction down.
Layers
Tick a box to show or hide a layer: open hole, each casing string and the liner, cement behind each string, open channel,
assumed bond, liner-top PBR / packer / hanger, marker joints / perfs / toe valve / shoe, planned plugs and clusters, simulated
fractures (created and propped), depth labels.
Fractures are simulated from the planned pump schedule (screening model, not mapped): one vertical ellipse per
cluster along the regional stress direction. Created: amber, orange where fluid is assumed lost behind partial cement, red
above the cement top. Propped: brown. Fractures are drawn true size; radial exaggeration does not change them.
Plan (top) shows the fracture map.
Layer transparency makes every layer more or less see-through, so the inner strings show through the cement and hole.
Zooming in on the annulus
Radial exaggeration scales only the radii (hole, casing, cement). MD, TVD and the path stay true. True 1x is real size,
Auto sizes the hole to the window, 50x suits the whole well.
Depth track: scroll on it to zoom the depth, drag a box across it to show that interval, double-click it for the
whole well. Exact MD window (left panel) takes typed From / To depths.
Cross-section and depth track
The cross-section (bottom right) is true scale, looking downhole, high side at the top, cut at the Depth.
The depth track (bottom left) plots bond index against MD: purple 4-1/2" liner, blue 7" (approximate), dots for planned
cluster readings, light blue for the open-channel share of the circumference, teal for the assumed bond below the log. Dotted lines
mark 0.6 (fair) and 0.8 (good); gray lines mark cement tops, shoes and the bottom of the log; the black line is the slice.
The dotted amber line (right axis) is the simulated created fracture half-length. The teal line (right axis) is the well log
picked under Well logs.
Well logs (when the well has them)
Caliper: the open hole wall and the outside of the cement follow the measured hole size, so washouts and tight spots
show in 3-D and in the cross-section. Where the caliper did not log, or reads at or inside a casing, the hole is drawn at bit size.
Bond log: a CBL amplitude (mV) or bond index curve colors the cement on the innermost string (the liner where it is
set, else the intermediate) with the same red-to-green bond scale; amplitude converts by ln(free/A) / ln(free/bonded).
Log color ring: pick a curve (gamma ray, density, neutron, resistivity, sonic, temperature and others) under
Well logs; a ring just outside the hole wall is colored by it (2nd to 98th percentile of the curve, resistivity on a log scale).
Hover shows every curve's value at that depth.
Multi-finger caliper: the pipe's inside wall drawn from every finger, oriented to the high side by the logged
relative bearing, colored by each finger's departure from the nominal ID (blue tight or dented, white nominal, red enlarged:
wear, corrosion, a split or a hole). Finger detail multiplies only the departure so small features show; 1x is true
size. Use Cutaway, or untick the casing and liner, to look inside. The cross-section draws the fingers at the slice and hover
gives the minimum, maximum and average ID and the largest finger.
Temperature: pick the temperature or its gradient as the ring and track curve. A sharp step or a gradient spike
at one depth (often at a collar or hardware) is where fluid enters or leaves the pipe; Go to lists the steps in this log.
Log depths are tied to the survey: the log's depth zero (KB, DF or GL from the log header) is shifted to the survey KB, any
tie-in shift is added, and TVD-indexed logs are placed on the path by MD. The sources and shifts are listed under Well logs.
Slow computer?
Layer look: See-through layers need an extra render pass that older graphics chips struggle with. Cutaway, solid
draws the outer layers as half-shells you can see into and is the fastest. Auto uses it whenever quality is Light, and Auto
quality drops to Light by itself if zooming or turning starts to lag.
Display quality (left panel): Auto picks Light on older or basic computers. Light uses coarser tubes and
draws fewer points; the numbers and readouts are the same at every setting. The choice is remembered on this computer.
Untick layers you do not need (fractures, open hole) and zoom in with + before turning the view.
Colors
Cement: red (bond index 0, free pipe) through orange and yellow (0.6, fair) to green (0.8 and up, good).
Light blue: open channel, no cement. Teal: assumed bond, not logged. Gray: not evaluated by the CBL. Khaki: cement per the schematic, not logged.
Everything not measured is listed under Assumptions in the left panel.